-
Panosight Visualizer Can’t Detect the Camera? I Fixed It with These 4 Checks
I ran into an issue while using the Panosight visualizer—the camera suddenly wasn’t recognized. Showing papers and experiment details became impossible, which was stressful during class.
After some troubleshooting, I realized it’s usually a connection or hardware issue. Here’s the 4-step checklist that worked for me:
Step 1：Unplug the USB cable on both ends, then plug it back in firmly to make sure the connection is secure.
Step 2：If that doesn’t work, try a different USB cable. The original one might be damaged.
Step 3：Switch the USB port from the front panel to the back panel of the computer to avoid power or contact issues.
Step 4：Still no luck? Then it’s very likely the camera module itself is faulty. Replacing the camera solved it for me immediately.
After following these steps, the visualizer worked smoothly again and class continued without interruptions.
If you’re still having issues, I’d recommend contacting online support for further help—they’re pretty responsive. -
1 Reply
-
you can connect it with power cable and it will start working
Log in to reply.
English 
简体中文